Finding your ring size
If you would like to determine your ring size immediately, we suggest that you print our simple Ring Sizing Guide and read the instructions carefully to ensure accurate sizing. Before you print, be sure to check that page scaling is set to “none” on your print dialogue box.
*In order to view this guide, you will need to have Adobe Acrobat Reader installed on your machine
HELPFUL HINTS
- If you are aiming to surprise your loved one, ask your partner’s parent or one of her close friends if they know her finger size.
- Borrow one of your partner’s rings and use the Ring Sizing Guide to determine its size. The ring should be from the correct finger on the correct hand.
- The average finger size is a 6 to 6.5 for women, and 9 to 10 for men. When no other information is available to you, selecting one of these sizes is your best choice.
- If the ring you select does not fit when you receive it, we will be happy to resize it for you within 14 days. Please contact us for resizing instructions.
INTERNATIONAL RING SIZE CONVERSION
All Riari J’Dorn Diamonds rings are specified in standard UK sizes. If you are looking for Australia, New Zealand, US, or Ireland ring sizes, view our ring size conversion chart below.
Find your ring size with our International Conversion Chart
Ring Dia ⌀ (Inside) | Ring Circumference (Inside) | ‹ International Standard Sizes › | ||||
MM | Inches | MM | Inches | UK / AU | USA / CA | Europe |
9.9 | 0.390 | 31.1 | 1.22 | · | 0000 | · |
10.7 | 0.442 | 33.7 | 1.39 | · | 00 | · |
11.5 | 0.454 | 36.2 | 1.43 | · | 0 | · |
12.0 | 0.470 | 37.5 | 1.50 | A | 1/2 | · |
12.2 | 0.479 | 38.3 | 1.51 | A 1/2 | 3/4 | · |
12.4 | 0.487 | 38.9 | 1.53 | B | 1 | · |
12.6 | 0.506 | 39.6 | 1.56 | B 1/2 | 1 1/4 | · |
12.8 | 0.503 | 40.2 | 1.58 | C | 1 1/2 | · |
13.0 | 0.511 | 40.8 | 1.61 | C 1/2 | 1 3/4 | · |
13.2 | 0.520 | 41.5 | 1.63 | D | 2 | 41 1/2 |
13.4 | 0.528 | 42.1 | 1.66 | D 1/2 | 2 1/4 | · |
13.6 | 0.536 | 42.8 | 1.68 | E | 2 1/2 | 42 3/4 |
13.8 | 0.544 | 43.5 | 1.71 | E 1/2 | 2 3/4 | · |
14.0 | 0.553 | 44.1 | 1.74 | F | 3 | 44 |
14.2 | 0.557 | 44.5 | 1.75 | F 1/2 | 3 1/8 | · |
14.3 | 0.561 | 44.8 | 1.76 | F 3/4 | 3 1/4 | · |
14.4 | 0.565 | 45.1 | 1.77 | G | 3 3/8 | 45 1/4 |
14.5 | 0.568 | 45.4 | 1.79 | G 1/4 | 3 1/2 | · |
14.6 | 0.573 | 45.7 | 1.80 | G 1/2 | 3 5/8 | · |
14.7 | 0.576 | 46.0 | 1.81 | H | 3 3/4 | 46 1/2 |
14.9 | 0.585 | 46.7 | 1.84 | H 1/2 | 4 | · |
15.0 | 0.592 | 47.3 | 1.86 | I | 4 1/4 | 47 3/4 |
15.3 | 0.601 | 48.0 | 1.89 | I 1/2 | 4 1/2 | · |
15.4 | 0.606 | 48.4 | 1.90 | J | 4 5/8 | 50 |
15.5 | 0.611 | 48.8 | 1.92 | J 1/4 | 4 3/4 | · |
15.7 | 0.618 | 50.3 | 1.94 | J 1/2 | 5 | · |
15.8 | 0.622 | 50.6 | 1.95 | K | 5 1/8 | 50 |
15.9 | 0.625 | 50.0 | 1.97 | K 1/4 | 5 1/4 | · |
16.0 | 0.630 | 50.3 | 1.98 | K 1/2 | 5 3/8 | · |
16.1 | 0.634 | 50.6 | 1.99 | L | 5 1/2 | 51 3/4 |
16.3 | 0.642 | 51.2 | 2.02 | L 1/4 | 5 3/4 | · |
16.4 | 0.646 | 51.6 | 2.03 | L 1/2 | 5 7/8 | · |
16.5 | 0.650 | 51.9 | 2.04 | M | 6 | 52 3/4 |
16.7 | 0.658 | 52.5 | 2.07 | M 1/2 | 6 1/4 | · |
16.9 | 0.666 | 53.2 | 2.09 | N | 6 1/2 | 54 |
17.1 | 0.674 | 53.8 | 2.12 | N 1/2 | 6 3/4 | · |
17.4 | 0.683 | 54.5 | 2.15 | O | 7 | 55 1/4 |
17.5 | 0.687 | 54.8 | 2.16 | O 1/2 | 7 1/4 | · |
17.8 | 0.698 | 55.8 | 2.20 | P | 7 1/2 | 56 1/2 |
18.0 | 0.707 | 56.5 | 2.22 | P 1/2 | 7 3/4 | · |
18.2 | 0.716 | 57.1 | 2.25 | Q | 8 | 57 3/4 |
18.4 | 0.722 | 57.7 | 2.27 | Q 1/2 | 8 1/4 | · |
18.5 | 0.729 | 58.2 | 2.29 | Q 3/4 | 8 1/2 | · |
18.6 | 0.733 | 58.5 | 2.30 | R | 8 5/8 | 59 |
18.7 | 0.736 | 58.7 | 2.31 | R 1/4 | 8 3/4 | · |
18.8 | 0.740 | 59.1 | 2.32 | R 1/2 | 8 7/8 | · |
18.9 | 0.743 | 59.3 | 2.35 | R 3/4 | 9 | · |
19.1 | 0.752 | 60.0 | 2.36 | S | 9 1/8 | 60 1/4 |
19.2 | 0.757 | 60.4 | 2.38 | S 1/4 | 9 1/4 | · |
19.3 | 0.760 | 60.7 | 2.39 | S 1/2 | 9 3/8 | · |
19.4 | 0.764 | 61.0 | 2.40 | S 3/4 | 9 1/2 | · |
19.5 | 0.768 | 61.3 | 2.41 | T | 9 5/8 | 61 1/2 |
19.6 | 0.772 | 61.6 | 2.43 | T 1/4 | 9 3/4 | · |
19.8 | 0.781 | 62.3 | 2.45 | T 1/2 | 10 | · |
20.0 | 0.780 | 62.9 | 2.48 | U | 10 1/4 | 62 3/4 |
20.2 | 0.795 | 63.5 | 2.50 | U 1/2 | 10 1/2 | · |
20.3 | 0.800 | 63.8 | 2.51 | V | 10 5/8 | 63 |
20.4 | 0.805 | 64.2 | 2.53 | V 1/4 | 10 3/4 | · |
20.7 | 0.814 | 65.0 | 2.56 | V 1/2 | 11 | · |
20.8 | 0.817 | 65.2 | 2.57 | W | 11 1/8 | 65 |
20.9 | 0.821 | 65.5 | 2.58 | W 1/4 | 11 1/4 | · |
20.9 | 0.824 | 65.8 | 2.59 | W 1/2 | 11 3/8 | · |
21.0 | 0.830 | 66.2 | 2.61 | W 3/4 | 11 1/2 | · |
21.2 | 0.834 | 66.5 | 2.62 | X | 11 5/8 | 66 1/4 |
21.2 | 0.836 | 66.7 | 2.63 | X 1/4 | 11 3/4 | · |
21.3 | 0.838 | 66.9 | 2.64 | X 1/2 | 11 7/8 | · |
21.5 | 0.846 | 67.5 | 2.66 | Y | 12 | 67 1/2 |
21.7 | 0.854 | 68.1 | 2.68 | Y 1/2 | 12 1/4 | · |
21.9 | 0.861 | 68.8 | 2.71 | Z | 12 1/2 | 68 3/4 |
22.1 | 0.870 | 69.4 | 2.73 | Z +1/2 | 12 3/4 | · |
22.3 | 0.879 | 70.2 | 2.76 | Z+1 | 13 | · |
22.6 | 0.890 | 71.0 | 2.80 | Z+1.5 | 13.5 | · |
22.7 | 0.893 | 71.3 | 2.81 | Z+2 | · | · |
22.9 | 0.902 | 72.0 | 2.83 | Z+2.5 | · | · |
23.0 | 0.908 | 72.5 | 2.85 | Z+3 | · | · |
23.3 | 0.915 | 73.0 | 2.87 | Z+3.5 | · | · |
23.5 | 0.924 | 73.7 | 2.90 | Z+4 | · | · |
23.6 | 0.927 | 74.0 | 2.91 | Z+4.5 | · | · |
23.9 | 0.940 | 75.0 | 2.95 | Z+5 | · | · |
24.3 | 0.955 | 76.2 | 3.00 | Z+6 | · | · |